Product Introduction

The CBM-F series crushing machine equipment adopts a high-speed rotor, combined with a sieve to achieve good material processing effect. The cantilever shaft adopts an air sealed structure to effectively protect the bearings; According to the different properties of the materials, woven screens or orifice plates can be selected. 

Features:

Flexible modular design; 

High speed, high efficiency, and high output; 

The material will not adhere to the outer shell, making it easy to clean; 

Low noise, meeting environmental requirements; 

Applied to fine crushing of hard blocks, crystals, or fibrous materials; 

The rotor has two working modes to choose from: dao surface and hammer surface; 

Thermal protection measures and high operational safety.     
Hard, crystalline, and fibrous materials can be crushed to 30 µ m. 

Suitable for laboratory or small batch materials. The compact and modular design allows it to be integrated into any process. Complies with GMP standards and can be used for sterile production.

Grinding fineness: 1 cm -30 µ m

Production: up to 700 kg/h

Product density: 2 kg/dm3

Product temperature: from -20 ° C to+60 ° C

Wide applicability, suitable for various dry, wet, and heat sensitive materials. The exquisite modular design allows for single machine use or embedding in various production lines. The material smoothness meets GMP standards, making disassembly and cleaning convenient. The ATEX explosion-proof certification in the 0/20 area ensures production safety, and the sterility level can reach OEB-5

Can achieve CIP/SIP (online cleaning/online sterilization) function.